Home Repair Tips – Floor Coverings

Filed Under: Do it yourself, Home repair, Redecorating    by: ITC

Hardwood floors are usually oak or maple. Softwood floors, usually made of pine, wear better when they are covered with

• Rugs or Carpets

• Linoleum

• Tile

Carpeting is fastened down professionally. A damaged section can be cut out and a new patch sewn, glued, tacked, taped or stapled in place.

Today linoleum is made of vinyl. It is thinner and softer but more durable than the original oil cloth linoleum. If water seeps under linoleum, the edges will come loose and begin to curl. Dry out the area and work cement under the loose edges. Pile on sandbags. Some excess cement will ooze out. Clean it up before it dries.

To lay a patch, cut the new piece the exact size of the hole. Match the pattern and cut the piece with a slight bevel. Remove all of the old cement or the patch will bulge. Set in the new piece and hold it down with sandbags.

Vinyl and asphalt are the materials most often used for floor ’tiles. Vinyl is soft and pliable. Asphalt tile is thicker, harder, and tends to chip. Remove a damaged tile by heating it with a hot pressing iron over a cloth. Scrape up all the old cement while it is warm and soft.

You may have to trim the new tile. Use a knife and straightedge to trim vinyl. Asphalt tile should be placed in a vise between two wood blocks and shaved down with a rasp.

A new tile may have to be trimmed to fit. Trim vinyl tiles with a knife and straightedge. trim asphalt tiles place them in a vice between wood blocks and file them down with a rasp.

Be Sociable, Share!

Tags: , , , , , , , , , , , , , , , , , ,

Leave a Reply


five − = 1